* @copyright Copyright © 2004, 2005, Nigel McNie * @license http://gnu.org/copyleft/gpl.html GNU GPL * @version $Id: geshi.php,v 1.40.2.10 2006/10/23 01:54:16 oracleshinoda Exp $ * */ // // GeSHi Constants // You should use these constant names in your programs instead of // their values - you never know when a value may change in a future // version // /** The version of this GeSHi file */ define('GESHI_VERSION', '1.0.7.15'); /** Set the correct directory separator */ define('GESHI_DIR_SEPARATOR', ('WIN' != substr(PHP_OS, 0, 3)) ? '/' : '\\'); // Define the root directory for the GeSHi code tree if (!defined('GESHI_ROOT')) { /** The root directory for GeSHi */ define('GESHI_ROOT', dirname(__FILE__) . GESHI_DIR_SEPARATOR); } /** The language file directory for GeSHi @access private */ define('GESHI_LANG_ROOT', GESHI_ROOT . 'geshi' . GESHI_DIR_SEPARATOR); // Line numbers - use with enable_line_numbers() /** Use no line numbers when building the result */ define('GESHI_NO_LINE_NUMBERS', 0); /** Use normal line numbers when building the result */ define('GESHI_NORMAL_LINE_NUMBERS', 1); /** Use fancy line numbers when building the result */ define('GESHI_FANCY_LINE_NUMBERS', 2); // Container HTML type /** Use nothing to surround the source */ define('GESHI_HEADER_NONE', 0); /** Use a "div" to surround the source */ define('GESHI_HEADER_DIV', 1); /** Use a "pre" to surround the source */ define('GESHI_HEADER_PRE', 2); // Capatalisation constants /** Lowercase keywords found */ define('GESHI_CAPS_NO_CHANGE', 0); /** Uppercase keywords found */ define('GESHI_CAPS_UPPER', 1); /** Leave keywords found as the case that they are */ define('GESHI_CAPS_LOWER', 2); // Link style constants /** Links in the source in the :link state */ define('GESHI_LINK', 0); /** Links in the source in the :hover state */ define('GESHI_HOVER', 1); /** Links in the source in the :active state */ define('GESHI_ACTIVE', 2); /** Links in the source in the :visited state */ define('GESHI_VISITED', 3); // Important string starter/finisher // Note that if you change these, they should be as-is: i.e., don't // write them as if they had been run through htmlentities() /** The starter for important parts of the source */ define('GESHI_START_IMPORTANT', ''); /** The ender for important parts of the source */ define('GESHI_END_IMPORTANT', ''); /**#@+ * @access private */ // When strict mode applies for a language /** Strict mode never applies (this is the most common) */ define('GESHI_NEVER', 0); /** Strict mode *might* apply, and can be enabled or disabled by {@link GeSHi::enable_strict_mode()} */ define('GESHI_MAYBE', 1); /** Strict mode always applies */ define('GESHI_ALWAYS', 2); // Advanced regexp handling constants, used in language files /** The key of the regex array defining what to search for */ define('GESHI_SEARCH', 0); /** The key of the regex array defining what bracket group in a matched search to use as a replacement */ define('GESHI_REPLACE', 1); /** The key of the regex array defining any modifiers to the regular expression */ define('GESHI_MODIFIERS', 2); /** The key of the regex array defining what bracket group in a matched search to put before the replacement */ define('GESHI_BEFORE', 3); /** The key of the regex array defining what bracket group in a matched search to put after the replacement */ define('GESHI_AFTER', 4); /** The key of the regex array defining a custom keyword to use for this regexp's html tag class */ define('GESHI_CLASS', 5); /** Used in language files to mark comments */ define('GESHI_COMMENTS', 0); // Error detection - use these to analyse faults /** No sourcecode to highlight was specified * @deprecated */ define('GESHI_ERROR_NO_INPUT', 1); /** The language specified does not exist */ define('GESHI_ERROR_NO_SUCH_LANG', 2); /** GeSHi could not open a file for reading (generally a language file) */ define('GESHI_ERROR_FILE_NOT_READABLE', 3); /** The header type passed to {@link GeSHi::set_header_type()} was invalid */ define('GESHI_ERROR_INVALID_HEADER_TYPE', 4); /** The line number type passed to {@link GeSHi::enable_line_numbers()} was invalid */ define('GESHI_ERROR_INVALID_LINE_NUMBER_TYPE', 5); /**#@-*/ /** * The GeSHi Class. * * Please refer to the documentation for GeSHi 1.0.X that is available * at http://qbnz.com/highlighter/documentation.php for more information * about how to use this class. * * @package core * @author Nigel McNie * @copyright Copyright © 2004, 2005 Nigel McNie */ class GeSHi { /**#@+ * @access private */ /** * The source code to highlight * @var string */ var $source = ''; /** * The language to use when highlighting * @var string */ var $language = ''; /** * The data for the language used * @var array */ var $language_data = array(); /** * The path to the language files * @var string */ var $language_path = GESHI_LANG_ROOT; /** * The error message associated with an error * @var string * @todo check err reporting works */ var $error = false; /** * Possible error messages * @var array */ var $error_messages = array( //GESHI_ERROR_NO_INPUT => 'No source code inputted', GESHI_ERROR_NO_SUCH_LANG => 'GeSHi could not find the language {LANGUAGE} (using path {PATH})', GESHI_ERROR_FILE_NOT_READABLE => 'The file specified for load_from_file was not readable', GESHI_ERROR_INVALID_HEADER_TYPE => 'The header type specified is invalid', GESHI_ERROR_INVALID_LINE_NUMBER_TYPE => 'The line number type specified is invalid' ); /** * Whether highlighting is strict or not * @var boolean */ var $strict_mode = false; /** * Whether to use CSS classes in output * @var boolean */ var $use_classes = false; /** * The type of header to use. Can be one of the following * values: * *
    *
  • GESHI_HEADER_PRE: Source is outputted in * a <pre> HTML element.
  • *
  • GESHI_HEADER_DIV: Source is outputted in * a <div> HTML element.
  • *
  • GESHI_HEADER_NONE: No header is outputted.
  • *
* * @var int */ var $header_type = GESHI_HEADER_PRE; /** * Array of permissions for which lexics should be highlighted * @var array */ var $lexic_permissions = array( 'KEYWORDS' => array(), 'COMMENTS' => array('MULTI' => true), 'REGEXPS' => array(), 'ESCAPE_CHAR' => true, 'BRACKETS' => true, 'SYMBOLS' => true, 'STRINGS' => true, 'NUMBERS' => true, 'METHODS' => true, 'SCRIPT' => true ); /** * The time it took to parse the code * @var double */ var $time = 0; /** * The content of the header block * @var string */ var $header_content = ''; /** * The content of the footer block * @var string */ var $footer_content = ''; /** * The style of the header block * @var string */ var $header_content_style = ''; /** * The style of the footer block * @var string */ var $footer_content_style = ''; /** * The styles for hyperlinks in the code * @var array */ var $link_styles = array(); /** * Whether important blocks should be recognised or not * @var boolean * @deprecated * @todo REMOVE THIS FUNCTIONALITY! */ var $enable_important_blocks = false; /** * Styles for important parts of the code * @var string * @deprecated * @todo As above - rethink the whole idea of important blocks as it is buggy and * will be hard to implement in 1.2 */ var $important_styles = 'font-weight: bold; color: red;'; // Styles for important parts of the code /** * Whether CSS IDs should be added to the code * @var boolean */ var $add_ids = false; /** * Lines that should be highlighted extra * @var array */ var $highlight_extra_lines = array(); /** * Styles of extra-highlighted lines * @var string */ var $highlight_extra_lines_style = 'color: #cc0; background-color: #ffc;'; /** * Number at which line numbers should start at * @var int * @todo Warning documentation about XHTML compliance */ var $line_numbers_start = 1; /** * The overall style for this code block * @var string */ var $overall_style = ''; /** * The style for the actual code * @var string */ var $code_style = 'font-family: \'Courier New\', Courier, monospace; font-weight: normal;'; /** * The overall class for this code block * @var string */ var $overall_class = ''; /** * The overall ID for this code block * @var string */ var $overall_id = ''; /** * Line number styles * @var string */ var $line_style1 = 'font-family: \'Courier New\', Courier, monospace; color: black; font-weight: normal; font-style: normal;'; /** * Line number styles for fancy lines * @var string */ var $line_style2 = 'font-weight: bold;'; /** * Flag for how line nubmers are displayed * @var boolean */ var $line_numbers = GESHI_NO_LINE_NUMBERS; /** * The "nth" value for fancy line highlighting * @var int */ var $line_nth_row = 0; /** * The size of tab stops * @var int */ var $tab_width = 8; /** * Default target for keyword links * @var string */ var $link_target = ''; /** * The encoding to use for entity encoding * @var string */ var $encoding = 'ISO-8859-1'; /**#@-*/ /** * Creates a new GeSHi object, with source and language * * @param string The source code to highlight * @param string The language to highlight the source with * @param string The path to the language file directory. This * is deprecated! I've backported the auto path * detection from the 1.1.X dev branch, so now it * should be automatically set correctly. If you have * renamed the language directory however, you will * still need to set the path using this parameter or * {@link GeSHi::set_language_path()} * @since 1.0.0 */ function GeSHi ($source, $language, $path = '') { $this->set_source($source); $this->set_language_path($path); $this->set_language($language); } /** * Returns an error message associated with the last GeSHi operation, * or false if no error has occured * * @return string|false An error message if there has been an error, else false * @since 1.0.0 */ function error () { if ($this->error) { $msg = $this->error_messages[$this->error]; $debug_tpl_vars = array( '{LANGUAGE}' => $this->language, '{PATH}' => $this->language_path ); foreach ($debug_tpl_vars as $tpl => $var) { $msg = str_replace($tpl, $var, $msg); } return "
GeSHi Error: $msg (code $this->error)
"; } return false; } /** * Gets a human-readable language name (thanks to Simon Patterson * for the idea :)) * * @return string The name for the current language * @since 1.0.2 */ function get_language_name () { if (GESHI_ERROR_NO_SUCH_LANG == $this->_error) { return $this->language_data['LANG_NAME'] . ' (Unknown Language)'; } return $this->language_data['LANG_NAME']; } /** * Sets the source code for this object * * @param string The source code to highlight * @since 1.0.0 */ function set_source ($source) { $this->source = $source; $this->highlight_extra_lines = array(); } /** * Sets the language for this object * * @param string The name of the language to use * @since 1.0.0 */ function set_language ($language) { $this->error = false; $this->strict_mode = GESHI_NEVER; $language = preg_replace('#[^a-zA-Z0-9\-_]#', '', $language); $this->language = strtolower($language); $file_name = $this->language_path . $this->language . '.php'; if (!is_readable($file_name)) { $this->error = GESHI_ERROR_NO_SUCH_LANG; return; } // Load the language for parsing $this->load_language($file_name); } /** * Sets the path to the directory containing the language files. Note * that this path is relative to the directory of the script that included * geshi.php, NOT geshi.php itself. * * @param string The path to the language directory * @since 1.0.0 * @deprecated The path to the language files should now be automatically * detected, so this method should no longer be needed. The * 1.1.X branch handles manual setting of the path differently * so this method will disappear in 1.2.0. */ function set_language_path ($path) { if ($path) { $this->language_path = ('/' == substr($path, strlen($path) - 1, 1)) ? $path : $path . '/'; $this->set_language($this->language); // otherwise set_language_path has no effect } } /** * Sets the type of header to be used. * * If GESHI_HEADER_DIV is used, the code is surrounded in a "div".This * means more source code but more control over tab width and line-wrapping. * GESHI_HEADER_PRE means that a "pre" is used - less source, but less * control. Default is GESHI_HEADER_PRE. * * From 1.0.7.2, you can use GESHI_HEADER_NONE to specify that no header code * should be outputted. * * @param int The type of header to be used * @since 1.0.0 */ function set_header_type ($type) { if (GESHI_HEADER_DIV != $type && GESHI_HEADER_PRE != $type && GESHI_HEADER_NONE != $type) { $this->error = GESHI_ERROR_INVALID_HEADER_TYPE; return; } $this->header_type = $type; // Set a default overall style if the header is a
if (GESHI_HEADER_DIV == $type && !$this->overall_style) { $this->overall_style = 'font-family: monospace;'; } } /** * Sets the styles for the code that will be outputted * when this object is parsed. The style should be a * string of valid stylesheet declarations * * @param string The overall style for the outputted code block * @param boolean Whether to merge the styles with the current styles or not * @since 1.0.0 */ function set_overall_style ($style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->overall_style = $style; } else { $this->overall_style .= $style; } } /** * Sets the overall classname for this block of code. This * class can then be used in a stylesheet to style this object's * output * * @param string The class name to use for this block of code * @since 1.0.0 */ function set_overall_class ($class) { $this->overall_class = $class; } /** * Sets the overall id for this block of code. This id can then * be used in a stylesheet to style this object's output * * @param string The ID to use for this block of code * @since 1.0.0 */ function set_overall_id ($id) { $this->overall_id = $id; } /** * Sets whether CSS classes should be used to highlight the source. Default * is off, calling this method with no arguments will turn it on * * @param boolean Whether to turn classes on or not * @since 1.0.0 */ function enable_classes ($flag = true) { $this->use_classes = ($flag) ? true : false; } /** * Sets the style for the actual code. This should be a string * containing valid stylesheet declarations. If $preserve_defaults is * true, then styles are merged with the default styles, with the * user defined styles having priority * * Note: Use this method to override any style changes you made to * the line numbers if you are using line numbers, else the line of * code will have the same style as the line number! Consult the * GeSHi documentation for more information about this. * * @param string The style to use for actual code * @param boolean Whether to merge the current styles with the new styles */ function set_code_style ($style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->code_style = $style; } else { $this->code_style .= $style; } } /** * Sets the styles for the line numbers. * * @param string The style for the line numbers that are "normal" * @param string|boolean If a string, this is the style of the line * numbers that are "fancy", otherwise if boolean then this * defines whether the normal styles should be merged with the * new normal styles or not * @param boolean If set, is the flag for whether to merge the "fancy" * styles with the current styles or not * @since 1.0.2 */ function set_line_style ($style1, $style2 = '', $preserve_defaults = false) { if (is_bool($style2)) { $preserve_defaults = $style2; $style2 = ''; } if (!$preserve_defaults) { $this->line_style1 = $style1; $this->line_style2 = $style2; } else { $this->line_style1 .= $style1; $this->line_style2 .= $style2; } } /** * Sets whether line numbers should be displayed. * * Valid values for the first parameter are: * *
    *
  • GESHI_NO_LINE_NUMBERS: Line numbers will not be displayed
  • *
  • GESHI_NORMAL_LINE_NUMBERS: Line numbers will be displayed
  • *
  • GESHI_FANCY_LINE_NUMBERS: Fancy line numbers will be displayed
  • *
* * For fancy line numbers, the second parameter is used to signal which lines * are to be fancy. For example, if the value of this parameter is 5 then every * 5th line will be fancy. * * @param int How line numbers should be displayed * @param int Defines which lines are fancy * @since 1.0.0 */ function enable_line_numbers ($flag, $nth_row = 5) { if (GESHI_NO_LINE_NUMBERS != $flag && GESHI_NORMAL_LINE_NUMBERS != $flag && GESHI_FANCY_LINE_NUMBERS != $flag) { $this->error = GESHI_ERROR_INVALID_LINE_NUMBER_TYPE; } $this->line_numbers = $flag; $this->line_nth_row = $nth_row; } /** * Sets the style for a keyword group. If $preserve_defaults is * true, then styles are merged with the default styles, with the * user defined styles having priority * * @param int The key of the keyword group to change the styles of * @param string The style to make the keywords * @param boolean Whether to merge the new styles with the old or just * to overwrite them * @since 1.0.0 */ function set_keyword_group_style ($key, $style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->language_data['STYLES']['KEYWORDS'][$key] = $style; } else { $this->language_data['STYLES']['KEYWORDS'][$key] .= $style; } } /** * Turns highlighting on/off for a keyword group * * @param int The key of the keyword group to turn on or off * @param boolean Whether to turn highlighting for that group on or off * @since 1.0.0 */ function set_keyword_group_highlighting ( $key, $flag = true ) { $this->lexic_permissions['KEYWORDS'][$key] = ($flag) ? true : false; } /** * Sets the styles for comment groups. If $preserve_defaults is * true, then styles are merged with the default styles, with the * user defined styles having priority * * @param int The key of the comment group to change the styles of * @param string The style to make the comments * @param boolean Whether to merge the new styles with the old or just * to overwrite them * @since 1.0.0 */ function set_comments_style ($key, $style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->language_data['STYLES']['COMMENTS'][$key] = $style; } else { $this->language_data['STYLES']['COMMENTS'][$key] .= $style; } } /** * Turns highlighting on/off for comment groups * * @param int The key of the comment group to turn on or off * @param boolean Whether to turn highlighting for that group on or off * @since 1.0.0 */ function set_comments_highlighting ($key, $flag = true) { $this->lexic_permissions['COMMENTS'][$key] = ($flag) ? true : false; } /** * Sets the styles for escaped characters. If $preserve_defaults is * true, then styles are merged with the default styles, with the * user defined styles having priority * * @param string The style to make the escape characters * @param boolean Whether to merge the new styles with the old or just * to overwrite them * @since 1.0.0 */ function set_escape_characters_style ($style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->language_data['STYLES']['ESCAPE_CHAR'][0] = $style; } else { $this->language_data['STYLES']['ESCAPE_CHAR'][0] .= $style; } } /** * Turns highlighting on/off for escaped characters * * @param boolean Whether to turn highlighting for escape characters on or off * @since 1.0.0 */ function set_escape_characters_highlighting ($flag = true) { $this->lexic_permissions['ESCAPE_CHAR'] = ($flag) ? true : false; } /** * Sets the styles for brackets. If $preserve_defaults is * true, then styles are merged with the default styles, with the * user defined styles having priority * * This method is DEPRECATED: use set_symbols_style instead. * This method will be removed in 1.2.X * * @param string The style to make the brackets * @param boolean Whether to merge the new styles with the old or just * to overwrite them * @since 1.0.0 * @deprecated In favour of set_symbols_style */ function set_brackets_style ($style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->language_data['STYLES']['BRACKETS'][0] = $style; } else { $this->language_data['STYLES']['BRACKETS'][0] .= $style; } } /** * Turns highlighting on/off for brackets * * This method is DEPRECATED: use set_symbols_highlighting instead. * This method will be remove in 1.2.X * * @param boolean Whether to turn highlighting for brackets on or off * @since 1.0.0 * @deprecated In favour of set_symbols_highlighting */ function set_brackets_highlighting ($flag) { $this->lexic_permissions['BRACKETS'] = ($flag) ? true : false; } /** * Sets the styles for symbols. If $preserve_defaults is * true, then styles are merged with the default styles, with the * user defined styles having priority * * @param string The style to make the symbols * @param boolean Whether to merge the new styles with the old or just * to overwrite them * @since 1.0.1 */ function set_symbols_style ($style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->language_data['STYLES']['SYMBOLS'][0] = $style; } else { $this->language_data['STYLES']['SYMBOLS'][0] .= $style; } // For backward compatibility $this->set_brackets_style ($style, $preserve_defaults); } /** * Turns highlighting on/off for symbols * * @param boolean Whether to turn highlighting for symbols on or off * @since 1.0.0 */ function set_symbols_highlighting ($flag) { $this->lexic_permissions['SYMBOLS'] = ($flag) ? true : false; // For backward compatibility $this->set_brackets_highlighting ($flag); } /** * Sets the styles for strings. If $preserve_defaults is * true, then styles are merged with the default styles, with the * user defined styles having priority * * @param string The style to make the escape characters * @param boolean Whether to merge the new styles with the old or just * to overwrite them * @since 1.0.0 */ function set_strings_style ($style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->language_data['STYLES']['STRINGS'][0] = $style; } else { $this->language_data['STYLES']['STRINGS'][0] .= $style; } } /** * Turns highlighting on/off for strings * * @param boolean Whether to turn highlighting for strings on or off * @since 1.0.0 */ function set_strings_highlighting ($flag) { $this->lexic_permissions['STRINGS'] = ($flag) ? true : false; } /** * Sets the styles for numbers. If $preserve_defaults is * true, then styles are merged with the default styles, with the * user defined styles having priority * * @param string The style to make the numbers * @param boolean Whether to merge the new styles with the old or just * to overwrite them * @since 1.0.0 */ function set_numbers_style ($style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->language_data['STYLES']['NUMBERS'][0] = $style; } else { $this->language_data['STYLES']['NUMBERS'][0] .= $style; } } /** * Turns highlighting on/off for numbers * * @param boolean Whether to turn highlighting for numbers on or off * @since 1.0.0 */ function set_numbers_highlighting ($flag) { $this->lexic_permissions['NUMBERS'] = ($flag) ? true : false; } /** * Sets the styles for methods. $key is a number that references the * appropriate "object splitter" - see the language file for the language * you are highlighting to get this number. If $preserve_defaults is * true, then styles are merged with the default styles, with the * user defined styles having priority * * @param int The key of the object splitter to change the styles of * @param string The style to make the methods * @param boolean Whether to merge the new styles with the old or just * to overwrite them * @since 1.0.0 */ function set_methods_style ($key, $style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->language_data['STYLES']['METHODS'][$key] = $style; } else { $this->language_data['STYLES']['METHODS'][$key] .= $style; } } /** * Turns highlighting on/off for methods * * @param boolean Whether to turn highlighting for methods on or off * @since 1.0.0 */ function set_methods_highlighting ($flag) { $this->lexic_permissions['METHODS'] = ($flag) ? true : false; } /** * Sets the styles for regexps. If $preserve_defaults is * true, then styles are merged with the default styles, with the * user defined styles having priority * * @param string The style to make the regular expression matches * @param boolean Whether to merge the new styles with the old or just * to overwrite them * @since 1.0.0 */ function set_regexps_style ($key, $style, $preserve_defaults = false) { if (!$preserve_defaults) { $this->language_data['STYLES']['REGEXPS'][$key] = $style; } else { $this->language_data['STYLES']['REGEXPS'][$key] .= $style; } } /** * Turns highlighting on/off for regexps * * @param int The key of the regular expression group to turn on or off * @param boolean Whether to turn highlighting for the regular expression group on or off * @since 1.0.0 */ function set_regexps_highlighting ($key, $flag) { $this->lexic_permissions['REGEXPS'][$key] = ($flag) ? true : false; } /** * Sets whether a set of keywords are checked for in a case sensitive manner * * @param int The key of the keyword group to change the case sensitivity of * @param boolean Whether to check in a case sensitive manner or not * @since 1.0.0 */ function set_case_sensitivity ($key, $case) { $this->language_data['CASE_SENSITIVE'][$key] = ($case) ? true : false; } /** * Sets the case that keywords should use when found. Use the constants: * *
    *
  • GESHI_CAPS_NO_CHANGE: leave keywords as-is
  • *
  • GESHI_CAPS_UPPER: convert all keywords to uppercase where found
  • *
  • GESHI_CAPS_LOWER: convert all keywords to lowercase where found
  • *
* * @param int A constant specifying what to do with matched keywords * @since 1.0.1 * @todo Error check the passed value */ function set_case_keywords ($case) { $this->language_data['CASE_KEYWORDS'] = $case; } /** * Sets how many spaces a tab is substituted for * * Widths below zero are ignored * * @param int The tab width * @since 1.0.0 */ function set_tab_width ($width) { $this->tab_width = intval($width); } /** * Enables/disables strict highlighting. Default is off, calling this * method without parameters will turn it on. See documentation * for more details on strict mode and where to use it. * * @param boolean Whether to enable strict mode or not * @since 1.0.0 */ function enable_strict_mode ($mode = true) { if (GESHI_MAYBE == $this->language_data['STRICT_MODE_APPLIES']) { $this->strict_mode = ($mode) ? true : false; } } /** * Disables all highlighting * * @since 1.0.0 * @todo Rewrite with an array traversal */ function disable_highlighting () { foreach ($this->lexic_permissions as $key => $value) { if (is_array($value)) { foreach ($value as $k => $v) { $this->lexic_permissions[$key][$k] = false; } } else { $this->lexic_permissions[$key] = false; } } // Context blocks $this->enable_important_blocks = false; } /** * Enables all highlighting * * @since 1.0.0 * @todo Rewrite with array traversal */ function enable_highlighting () { foreach ($this->lexic_permissions as $key => $value) { if (is_array($value)) { foreach ($value as $k => $v) { $this->lexic_permissions[$key][$k] = true; } } else { $this->lexic_permissions[$key] = true; } } // Context blocks $this->enable_important_blocks = true; } /** * Given a file extension, this method returns either a valid geshi language * name, or the empty string if it couldn't be found * * @param string The extension to get a language name for * @param array A lookup array to use instead of the default * @since 1.0.5 * @todo Re-think about how this method works (maybe make it private and/or make it * a extension->lang lookup?) * @todo static? */ function get_language_name_from_extension ( $extension, $lookup = array() ) { if ( !$lookup ) { $lookup = array( 'actionscript' => array('as'), 'ada' => array('a', 'ada', 'adb', 'ads'), 'apache' => array('conf'), 'asm' => array('ash', 'asm'), 'asp' => array('asp'), 'bash' => array('sh'), 'c' => array('c'), 'c_mac' => array('c'), 'caddcl' => array(), 'cadlisp' => array(), 'cdfg' => array('cdfg'), 'cpp' => array('cpp'), 'csharp' => array(), 'css' => array('css'), 'delphi' => array('dpk', 'dpr'), 'html4strict' => array('html', 'htm'), 'java' => array('java'), 'javascript' => array('js'), 'lisp' => array('lisp'), 'lua' => array('lua'), 'mpasm' => array(), 'nsis' => array(), 'objc' => array(), 'oobas' => array(), 'oracle8' => array(), 'pascal' => array('pas'), 'perl' => array('pl', 'pm'), 'php' => array('php', 'php5', 'phtml', 'phps'), 'python' => array('py'), 'qbasic' => array('bi'), 'sas' => array('sas'), 'smarty' => array(), 'vb' => array('bas'), 'vbnet' => array(), 'visualfoxpro' => array(), 'xml' => array('xml') ); } foreach ($lookup as $lang => $extensions) { foreach ($extensions as $ext) { if ($ext == $extension) { return $lang; } } } return ''; } /** * Given a file name, this method loads its contents in, and attempts * to set the language automatically. An optional lookup table can be * passed for looking up the language name. If not specified a default * table is used * * The language table is in the form *
array(
	 *   'lang_name' => array('extension', 'extension', ...),
	 *   'lang_name' ...
	 * );
* * @todo Complete rethink of this and above method * @since 1.0.5 */ function load_from_file ($file_name, $lookup = array()) { if (is_readable($file_name)) { $this->set_source(implode('', file($file_name))); $this->set_language($this->get_language_name_from_extension(substr(strrchr($file_name, '.'), 1), $lookup)); } else { $this->error = GESHI_ERROR_FILE_NOT_READABLE; } } /** * Adds a keyword to a keyword group for highlighting * * @param int The key of the keyword group to add the keyword to * @param string The word to add to the keyword group * @since 1.0.0 */ function add_keyword ($key, $word) { $this->language_data['KEYWORDS'][$key][] = $word; } /** * Removes a keyword from a keyword group * * @param int The key of the keyword group to remove the keyword from * @param string The word to remove from the keyword group * @since 1.0.0 */ function remove_keyword ($key, $word) { $this->language_data['KEYWORDS'][$key] = array_diff($this->language_data['KEYWORDS'][$key], array($word)); } /** * Creates a new keyword group * * @param int The key of the keyword group to create * @param string The styles for the keyword group * @param boolean Whether the keyword group is case sensitive ornot * @param array The words to use for the keyword group * @since 1.0.0 */ function add_keyword_group ( $key, $styles, $case_sensitive = true, $words = array() ) { $words = (array) $words; $this->language_data['KEYWORDS'][$key] = $words; $this->lexic_permissions['KEYWORDS'][$key] = true; $this->language_data['CASE_SENSITIVE'][$key] = $case_sensitive; $this->language_data['STYLES']['KEYWORDS'][$key] = $styles; } /** * Removes a keyword group * * @param int The key of the keyword group to remove * @since 1.0.0 */ function remove_keyword_group ($key) { unset($this->language_data['KEYWORDS'][$key]); unset($this->lexic_permissions['KEYWORDS'][$key]); unset($this->language_data['CASE_SENSITIVE'][$key]); unset($this->language_data['STYLES']['KEYWORDS'][$key]); } /** * Sets the content of the header block * * @param string The content of the header block * @since 1.0.2 */ function set_header_content ($content) { $this->header_content = $content; } /** * Sets the content of the footer block * * @param string The content of the footer block * @since 1.0.2 */ function set_footer_content ($content) { $this->footer_content = $content; } /** * Sets the style for the header content * * @param string The style for the header content * @since 1.0.2 */ function set_header_content_style ($style) { $this->header_content_style = $style; } /** * Sets the style for the footer content * * @param string The style for the footer content * @since 1.0.2 */ function set_footer_content_style ($style) { $this->footer_content_style = $style; } /** * Sets the base URL to be used for keywords * * @param int The key of the keyword group to set the URL for * @param string The URL to set for the group. If {FNAME} is in * the url somewhere, it is replaced by the keyword * that the URL is being made for * @since 1.0.2 */ function set_url_for_keyword_group ($group, $url) { $this->language_data['URLS'][$group] = $url; } /** * Sets styles for links in code * * @param int A constant that specifies what state the style is being * set for - e.g. :hover or :visited * @param string The styles to use for that state * @since 1.0.2 */ function set_link_styles ($type, $styles) { $this->link_styles[$type] = $styles; } /** * Sets the target for links in code * * @param string The target for links in the code, e.g. _blank * @since 1.0.3 */ function set_link_target ( $target ) { if (!$target) { $this->link_target = ''; } else { $this->link_target = ' target="' . $target . '" '; } } /** * Sets styles for important parts of the code * * @param string The styles to use on important parts of the code * @since 1.0.2 */ function set_important_styles ($styles) { $this->important_styles = $styles; } /** * Sets whether context-important blocks are highlighted * * @todo REMOVE THIS SHIZ FROM GESHI! * @deprecated */ function enable_important_blocks ( $flag ) { $this->enable_important_blocks = ( $flag ) ? true : false; } /** * Whether CSS IDs should be added to each line * * @param boolean If true, IDs will be added to each line. * @since 1.0.2 */ function enable_ids ($flag = true) { $this->add_ids = ($flag) ? true : false; } /** * Specifies which lines to highlight extra * * @param mixed An array of line numbers to highlight, or just a line * number on its own. * @since 1.0.2 * @todo Some data replication here that could be cut down on */ function highlight_lines_extra ($lines) { if (is_array($lines)) { foreach ($lines as $line) { $this->highlight_extra_lines[intval($line)] = intval($line); } } else { $this->highlight_extra_lines[intval($lines)] = intval($lines); } } /** * Sets the style for extra-highlighted lines * * @param string The style for extra-highlighted lines * @since 1.0.2 */ function set_highlight_lines_extra_style ($styles) { $this->highlight_extra_lines_style = $styles; } /** * Sets what number line numbers should start at. Should * be a positive integer, and will be converted to one. * * Warning: Using this method will add the "start" * attribute to the <ol> that is used for line numbering. * This is not valid XHTML strict, so if that's what you * care about then don't use this method. Firefox is getting * support for the CSS method of doing this in 1.1 and Opera * has support for the CSS method, but (of course) IE doesn't * so it's not worth doing it the CSS way yet. * * @param int The number to start line numbers at * @since 1.0.2 */ function start_line_numbers_at ($number) { $this->line_numbers_start = abs(intval($number)); } /** * Sets the encoding used for htmlspecialchars(), for international * support. * * @param string The encoding to use for the source * @since 1.0.3 */ function set_encoding ($encoding) { if ($encoding) { $this->encoding = $encoding; } } /** * Returns the code in $this->source, highlighted and surrounded by the * nessecary HTML. * * This should only be called ONCE, cos it's SLOW! If you want to highlight * the same source multiple times, you're better off doing a whole lot of * str_replaces to replace the <span>s * * @since 1.0.0 */ function parse_code () { // Start the timer $start_time = microtime(); // Firstly, if there is an error, we won't highlight if ($this->error) { $result = @htmlspecialchars($this->source, ENT_COMPAT, $this->encoding); // Timing is irrelevant $this->set_time($start_time, $start_time); return $this->finalise($result); } // Replace all newlines to a common form. $code = str_replace("\r\n", "\n", $this->source); $code = str_replace("\r", "\n", $code); // Add spaces for regular expression matching and line numbers $code = "\n" . $code . "\n"; // Initialise various stuff $length = strlen($code); $STRING_OPEN = ''; $CLOSE_STRING = false; $ESCAPE_CHAR_OPEN = false; $COMMENT_MATCHED = false; // Turn highlighting on if strict mode doesn't apply to this language $HIGHLIGHTING_ON = ( !$this->strict_mode ) ? true : ''; // Whether to highlight inside a block of code $HIGHLIGHT_INSIDE_STRICT = false; $HARDQUOTE_OPEN = false; $stuff_to_parse = ''; $result = ''; // "Important" selections are handled like multiline comments // @todo GET RID OF THIS SHIZ if ($this->enable_important_blocks) { $this->language_data['COMMENT_MULTI'][GESHI_START_IMPORTANT] = GESHI_END_IMPORTANT; } if ($this->strict_mode) { // Break the source into bits. Each bit will be a portion of the code // within script delimiters - for example, HTML between < and > $parts = array(0 => array(0 => '')); $k = 0; for ($i = 0; $i < $length; $i++) { $char = substr($code, $i, 1); if (!$HIGHLIGHTING_ON) { foreach ($this->language_data['SCRIPT_DELIMITERS'] as $key => $delimiters) { foreach ($delimiters as $open => $close) { // Get the next little bit for this opening string $check = substr($code, $i, strlen($open)); // If it matches... if ($check == $open) { // We start a new block with the highlightable // code in it $HIGHLIGHTING_ON = $open; $i += strlen($open) - 1; $char = $open; $parts[++$k][0] = $char; // No point going around again... break(2); } } } } else { foreach ($this->language_data['SCRIPT_DELIMITERS'] as $key => $delimiters) { foreach ($delimiters as $open => $close) { if ($open == $HIGHLIGHTING_ON) { // Found the closing tag break(2); } } } // We check code from our current position BACKWARDS. This is so // the ending string for highlighting can be included in the block $check = substr($code, $i - strlen($close) + 1, strlen($close)); if ($check == $close) { $HIGHLIGHTING_ON = ''; // Add the string to the rest of the string for this part $parts[$k][1] = ( isset($parts[$k][1]) ) ? $parts[$k][1] . $char : $char; $parts[++$k][0] = ''; $char = ''; } } $parts[$k][1] = ( isset($parts[$k][1]) ) ? $parts[$k][1] . $char : $char; } $HIGHLIGHTING_ON = ''; } else { // Not strict mode - simply dump the source into // the array at index 1 (the first highlightable block) $parts = array( 1 => array( 0 => '', 1 => $code ) ); } // Now we go through each part. We know that even-indexed parts are // code that shouldn't be highlighted, and odd-indexed parts should // be highlighted foreach ($parts as $key => $data) { $part = $data[1]; // If this block should be highlighted... if ($key % 2) { if ($this->strict_mode) { // Find the class key for this block of code foreach ($this->language_data['SCRIPT_DELIMITERS'] as $script_key => $script_data) { foreach ($script_data as $open => $close) { if ($data[0] == $open) { break(2); } } } if ($this->language_data['STYLES']['SCRIPT'][$script_key] != '' && $this->lexic_permissions['SCRIPT']) { // Add a span element around the source to // highlight the overall source block if (!$this->use_classes && $this->language_data['STYLES']['SCRIPT'][$script_key] != '') { $attributes = ' style="' . $this->language_data['STYLES']['SCRIPT'][$script_key] . '"'; } else { $attributes = ' class="sc' . $script_key . '"'; } $result .= ""; } } if (!$this->strict_mode || $this->language_data['HIGHLIGHT_STRICT_BLOCK'][$script_key]) { // Now, highlight the code in this block. This code // is really the engine of GeSHi (along with the method // parse_non_string_part). $length = strlen($part); for ($i = 0; $i < $length; $i++) { // Get the next char $char = substr($part, $i, 1); $hq = isset($this->language_data['HARDQUOTE']) ? $this->language_data['HARDQUOTE'][0] : false; // Is this char the newline and line numbers being used? if (($this->line_numbers != GESHI_NO_LINE_NUMBERS || count($this->highlight_extra_lines) > 0) && $char == "\n") { // If so, is there a string open? If there is, we should end it before // the newline and begin it again (so when
  • s are put in the source // remains XHTML compliant) // note to self: This opens up possibility of config files specifying // that languages can/cannot have multiline strings??? if ($STRING_OPEN) { if (!$this->use_classes) { $attributes = ' style="' . $this->language_data['STYLES']['STRINGS'][0] . '"'; } else { $attributes = ' class="st0"'; } $char = '' . $char . ""; } } elseif ($char == $STRING_OPEN) { // A match of a string delimiter if (($this->lexic_permissions['ESCAPE_CHAR'] && $ESCAPE_CHAR_OPEN) || ($this->lexic_permissions['STRINGS'] && !$ESCAPE_CHAR_OPEN)) { $char = htmlspecialchars($char, ENT_COMPAT, $this->encoding) . ''; } $escape_me = false; if ($HARDQUOTE_OPEN) { if ($ESCAPE_CHAR_OPEN) $escape_me = true; else { foreach ($this->language_data['HARDESCAPE'] as $hardesc) if (substr($part, $i, strlen($hardesc)) == $hardesc) { $escape_me = true; break; } } } if (!$ESCAPE_CHAR_OPEN) { $STRING_OPEN = ''; $CLOSE_STRING = true; } if (!$escape_me) { $HARDQUOTE_OPEN = false; } $ESCAPE_CHAR_OPEN = false; } elseif (in_array($char, $this->language_data['QUOTEMARKS']) && ($STRING_OPEN == '') && $this->lexic_permissions['STRINGS']) { // The start of a new string $STRING_OPEN = $char; if (!$this->use_classes) { $attributes = ' style="' . $this->language_data['STYLES']['STRINGS'][0] . '"'; } else { $attributes = ' class="st0"'; } $char = "" . htmlspecialchars($char, ENT_COMPAT, $this->encoding); $result .= $this->parse_non_string_part( $stuff_to_parse ); $stuff_to_parse = ''; } elseif ( $hq && substr($part, $i, strlen($hq)) == $hq && ($STRING_OPEN == '') && $this->lexic_permissions['STRINGS'] ) { // The start of a hard quoted string $STRING_OPEN = $this->language_data['HARDQUOTE'][1]; if (!$this->use_classes) { $attributes = ' style="' . $this->language_data['STYLES']['STRINGS'][0] . '"'; } else { $attributes = ' class="st0"'; } $char = "" . $hq; $i += strlen($hq) - 1; $HARDQUOTE_OPEN = true; $result .= $this->parse_non_string_part( $stuff_to_parse ); $stuff_to_parse = ''; } elseif ($char == $this->language_data['ESCAPE_CHAR'] && $STRING_OPEN != '') { // An escape character if (!$ESCAPE_CHAR_OPEN) { $ESCAPE_CHAR_OPEN = !$HARDQUOTE_OPEN; // true unless $HARDQUOTE_OPEN if ($HARDQUOTE_OPEN) foreach ($this->language_data['HARDESCAPE'] as $hard) { if (substr($part, $i, strlen($hard)) == $hard) { $ESCAPE_CHAR_OPEN = true; break; } } if ($ESCAPE_CHAR_OPEN && $this->lexic_permissions['ESCAPE_CHAR']) { if (!$this->use_classes) { $attributes = ' style="' . $this->language_data['STYLES']['ESCAPE_CHAR'][0] . '"'; } else { $attributes = ' class="es0"'; } $char = "" . $char; if (substr($code, $i + 1, 1) == "\n") { // escaping a newline, what's the point in putting the span around // the newline? It only causes hassles when inserting line numbers $char .= ''; $ESCAPE_CHAR_OPEN = false; } } } else { $ESCAPE_CHAR_OPEN = false; if ($this->lexic_permissions['ESCAPE_CHAR']) { $char .= ''; } } } elseif ($ESCAPE_CHAR_OPEN) { if ($this->lexic_permissions['ESCAPE_CHAR']) { $char .= ''; } $ESCAPE_CHAR_OPEN = false; $test_str = $char; } elseif ($STRING_OPEN == '') { // Is this a multiline comment? foreach ($this->language_data['COMMENT_MULTI'] as $open => $close) { $com_len = strlen($open); $test_str = substr( $part, $i, $com_len ); $test_str_match = $test_str; if ($open == $test_str) { $COMMENT_MATCHED = true; //@todo If remove important do remove here if ($this->lexic_permissions['COMMENTS']['MULTI'] || $test_str == GESHI_START_IMPORTANT) { if ($test_str != GESHI_START_IMPORTANT) { if (!$this->use_classes) { $attributes = ' style="' . $this->language_data['STYLES']['COMMENTS']['MULTI'] . '"'; } else { $attributes = ' class="coMULTI"'; } $test_str = "" . @htmlspecialchars($test_str, ENT_COMPAT, $this->encoding); } else { if (!$this->use_classes) { $attributes = ' style="' . $this->important_styles . '"'; } else { $attributes = ' class="imp"'; } // We don't include the start of the comment if it's an // "important" part $test_str = ""; } } else { $test_str = @htmlspecialchars($test_str, ENT_COMPAT, $this->encoding); } $close_pos = strpos( $part, $close, $i + strlen($close) ); if ($close_pos === false) { $close_pos = strlen($part); } // Short-cut through all the multiline code $rest_of_comment = @htmlspecialchars(substr($part, $i + $com_len, $close_pos - $i), ENT_COMPAT, $this->encoding); if (($this->lexic_permissions['COMMENTS']['MULTI'] || $test_str_match == GESHI_START_IMPORTANT) && ($this->line_numbers != GESHI_NO_LINE_NUMBERS || count($this->highlight_extra_lines) > 0)) { // strreplace to put close span and open span around multiline newlines $test_str .= str_replace("\n", "\n", $rest_of_comment); } else { $test_str .= $rest_of_comment; } if ($this->lexic_permissions['COMMENTS']['MULTI'] || $test_str_match == GESHI_START_IMPORTANT) { $test_str .= ''; } $i = $close_pos + $com_len - 1; // parse the rest $result .= $this->parse_non_string_part($stuff_to_parse); $stuff_to_parse = ''; break; } } // If we haven't matched a multiline comment, try single-line comments if (!$COMMENT_MATCHED) { foreach ($this->language_data['COMMENT_SINGLE'] as $comment_key => $comment_mark) { $com_len = strlen($comment_mark); $test_str = substr($part, $i, $com_len); if ($this->language_data['CASE_SENSITIVE'][GESHI_COMMENTS]) { $match = ($comment_mark == $test_str); } else { $match = (strtolower($comment_mark) == strtolower($test_str)); } if ($match) { $COMMENT_MATCHED = true; if ($this->lexic_permissions['COMMENTS'][$comment_key]) { if (!$this->use_classes) { $attributes = ' style="' . $this->language_data['STYLES']['COMMENTS'][$comment_key] . '"'; } else { $attributes = ' class="co' . $comment_key . '"'; } $test_str = "" . @htmlspecialchars($this->change_case($test_str), ENT_COMPAT, $this->encoding); } else { $test_str = @htmlspecialchars($test_str, ENT_COMPAT, $this->encoding); } $close_pos = strpos($part, "\n", $i); $oops = false; if ($close_pos === false) { $close_pos = strlen($part); $oops = true; } $test_str .= @htmlspecialchars(substr($part, $i + $com_len, $close_pos - $i - $com_len), ENT_COMPAT, $this->encoding); if ($this->lexic_permissions['COMMENTS'][$comment_key]) { $test_str .= ""; } // Take into account that the comment might be the last in the source if (!$oops) { $test_str .= "\n"; } $i = $close_pos; // parse the rest $result .= $this->parse_non_string_part($stuff_to_parse); $stuff_to_parse = ''; break; } } } } elseif ($STRING_OPEN != '') { // Otherwise, convert it to HTML form if (strtolower($this->encoding) == 'utf-8') { //only escape <128 (we don't want to break multibyte chars) if (ord($char) < 128) { $char = @htmlspecialchars($char, ENT_COMPAT, $this->encoding); } } else { //encode everthing $char = @htmlspecialchars($char, ENT_COMPAT, $this->encoding); } } // Where are we adding this char? if (!$COMMENT_MATCHED) { if (($STRING_OPEN == '') && !$CLOSE_STRING) { $stuff_to_parse .= $char; } else { $result .= $char; $CLOSE_STRING = false; } } else { $result .= $test_str; $COMMENT_MATCHED = false; } } // Parse the last bit $result .= $this->parse_non_string_part($stuff_to_parse); $stuff_to_parse = ''; } else { $result .= @htmlspecialchars($part, ENT_COMPAT, $this->encoding); } // Close the that surrounds the block if ($this->strict_mode && $this->language_data['STYLES']['SCRIPT'][$script_key] != '' && $this->lexic_permissions['SCRIPT']) { $result .= ''; } } else { // Else not a block to highlight $result .= @htmlspecialchars($part, ENT_COMPAT, $this->encoding); } } // Parse the last stuff (redundant?) $result .= $this->parse_non_string_part($stuff_to_parse); // Lop off the very first and last spaces $result = substr($result, 1, -1); // Are we still in a string? if ($STRING_OPEN) { $result .= ''; } // We're finished: stop timing $this->set_time($start_time, microtime()); return $this->finalise($result); } /** * Swaps out spaces and tabs for HTML indentation. Not needed if * the code is in a pre block... * * @param string The source to indent * @return string The source with HTML indenting applied * @since 1.0.0 * @access private */ function indent ($result) { /// Replace tabs with the correct number of spaces if (false !== strpos($result, "\t")) { $lines = explode("\n", $result); foreach ($lines as $key => $line) { if (false === strpos($line, "\t")) { $lines[$key] = $line; continue; } $pos = 0; $tab_width = $this->tab_width; $length = strlen($line); $result_line = ''; $IN_TAG = false; for ($i = 0; $i < $length; $i++) { $char = substr($line, $i, 1); // Simple engine to work out whether we're in a tag. // If we are we modify $pos. This is so we ignore HTML // in the line and only workout the tab replacement // via the actual content of the string // This test could be improved to include strings in the // html so that < or > would be allowed in user's styles // (e.g. quotes: '<' '>'; or similar) if ($IN_TAG && '>' == $char) { $IN_TAG = false; $result_line .= '>'; ++$pos; } elseif (!$IN_TAG && '<' == $char) { $IN_TAG = true; $result_line .= '<'; ++$pos; } elseif (!$IN_TAG && '&' == $char) { $substr = substr($line, $i + 3, 4); //$substr_5 = substr($line, 5, 1); $posi = strpos($substr, ';'); if (false !== $posi) { $pos += $posi + 3; } $result_line .= '&'; } elseif (!$IN_TAG && "\t" == $char) { $str = ''; // OPTIMISE - move $strs out. Make an array: // $tabs = array( // 1 => ' ', // 2 => '  ', // 3 => '   ' etc etc // to use instead of building a string every time $strs = array(0 => ' ', 1 => ' '); for ($k = 0; $k < ($tab_width - (($i - $pos) % $tab_width)); $k++) $str .= $strs[$k % 2]; $result_line .= $str; //$pos--; $pos++; //$pos -= $tab_width-1; if (false === strpos($line, "\t", $i + 1)) { //$lines[$key] = $result_line; $result_line .= substr($line, $i + 1); break; } } elseif ( $IN_TAG ) { ++$pos; $result_line .= $char; } else { $result_line .= $char; //++$pos; } } $lines[$key] = $result_line; } $result = implode("\n", $lines); } // Other whitespace $result = str_replace(' ', '  ', $result); $result = str_replace(' ', '  ', $result); $result = str_replace("\n ", "\n ", $result); if ($this->line_numbers == GESHI_NO_LINE_NUMBERS) { $result = nl2br($result); } return $result; } /** * Changes the case of a keyword for those languages where a change is asked for * * @param string The keyword to change the case of * @return string The keyword with its case changed * @since 1.0.0 * @access private */ function change_case ($instr) { if ($this->language_data['CASE_KEYWORDS'] == GESHI_CAPS_UPPER) { return strtoupper($instr); } elseif ($this->language_data['CASE_KEYWORDS'] == GESHI_CAPS_LOWER) { return strtolower($instr); } return $instr; } /** * Adds a url to a keyword where needed. * * @param string The keyword to add the URL HTML to * @param int What group the keyword is from * @param boolean Whether to get the HTML for the start or end * @return The HTML for either the start or end of the HTML <a> tag * @since 1.0.2 * @access private * @todo Get rid of ender */ function add_url_to_keyword ($keyword, $group, $start_or_end) { if (isset($this->language_data['URLS'][$group]) && $this->language_data['URLS'][$group] != '' && substr($keyword, 0, 5) != '</') { // There is a base group for this keyword if ($start_or_end == 'BEGIN') { // HTML workaround... not good form (tm) but should work for 1.0.X if ($keyword != '') { // Old system: strtolower //$keyword = ( $this->language_data['CASE_SENSITIVE'][$group] ) ? $keyword : strtolower($keyword); // New system: get keyword from language file to get correct case foreach ($this->language_data['KEYWORDS'][$group] as $word) { if (strtolower($word) == strtolower($keyword)) { break; } } $word = ( substr($word, 0, 4) == '<' ) ? substr($word, 4) : $word; $word = ( substr($word, -4) == '>' ) ? substr($word, 0, strlen($word) - 4) : $word; if (!$word) return ''; return '<|UR1|"' . str_replace( array('{FNAME}', '.'), array(@htmlspecialchars($word, ENT_COMPAT, $this->encoding), ''), $this->language_data['URLS'][$group] ) . '">'; } return ''; // HTML fix. Again, dirty hackage... } elseif (!($this->language == 'html4strict' && '>' == $keyword)) { return ''; } } } /** * Takes a string that has no strings or comments in it, and highlights * stuff like keywords, numbers and methods. * * @param string The string to parse for keyword, numbers etc. * @since 1.0.0 * @access private * @todo BUGGY! Why? Why not build string and return? */ function parse_non_string_part (&$stuff_to_parse) { $stuff_to_parse = ' ' . @htmlspecialchars($stuff_to_parse, ENT_COMPAT, $this->encoding); $stuff_to_parse_pregquote = preg_quote($stuff_to_parse, '/'); $func = '$this->change_case'; $func2 = '$this->add_url_to_keyword'; // // Regular expressions // foreach ($this->language_data['REGEXPS'] as $key => $regexp) { if ($this->lexic_permissions['REGEXPS'][$key]) { if (is_array($regexp)) { $stuff_to_parse = preg_replace( "/" . str_replace('/', '\/', $regexp[GESHI_SEARCH]) . "/{$regexp[GESHI_MODIFIERS]}", "{$regexp[GESHI_BEFORE]}<|!REG3XP$key!>{$regexp[GESHI_REPLACE]}|>{$regexp[GESHI_AFTER]}", $stuff_to_parse ); } else { $stuff_to_parse = preg_replace( "/(" . str_replace('/', '\/', $regexp) . ")/", "<|!REG3XP$key!>\\1|>", $stuff_to_parse); } } } // // Highlight numbers. This regexp sucks... anyone with a regexp that WORKS // here wins a cookie if they send it to me. At the moment there's two doing // almost exactly the same thing, except the second one prevents a number // being highlighted twice (eg 5) // Put /NUM!/ in for the styles, which gets replaced at the end. // // NEW ONE: Brice Bernard // $stuff_to_parse = preg_replace('/([^(\\w|#|\\\|"|\')])(\\d+)/', '\\1<|/NUM!/>\\2|>', $stuff_to_parse); //$stuff_to_parse = preg_replace('/([-+]?\\b(?:[0-9]*\\.)?[0-9]+\\b)/', '<|/NUM!/>\\1|>', $stuff_to_parse); // if ($this->lexic_permissions['NUMBERS'] && preg_match('#[0-9]#', $stuff_to_parse )) { //$stuff_to_parse = preg_replace('#([^a-zA-Z0-9_\#])([0-9]+)([^a-zA-Z0-9])#', "\\1<|/NUM!/>\\2|>\\3", $stuff_to_parse); //$stuff_to_parse = preg_replace('#([^a-zA-Z0-9_\#>])([0-9]+)([^a-zA-Z0-9])#', "\\1<|/NUM!/>\\2|>\\3", $stuff_to_parse); $stuff_to_parse = preg_replace('/([-+]?\\b(?:[0-9]*\\.)?[0-9]+\\b)/', '<|/NUM!/>\\1|>', $stuff_to_parse); } // Highlight keywords // if there is a couple of alpha symbols there *might* be a keyword if (preg_match('#[a-zA-Z]{2,}#', $stuff_to_parse)) { foreach ($this->language_data['KEYWORDS'] as $k => $keywordset) { if ($this->lexic_permissions['KEYWORDS'][$k]) { foreach ($keywordset as $keyword) { $keyword = preg_quote($keyword, '/'); // // This replacement checks the word is on it's own (except if brackets etc // are next to it), then highlights it. We don't put the color=" for the span // in just yet - otherwise languages with the keywords "color" or "or" have // a fit. // if (false !== stristr($stuff_to_parse_pregquote, $keyword )) { $stuff_to_parse .= ' '; // Might make a more unique string for putting the number in soon // Basically, we don't put the styles in yet because then the styles themselves will // get highlighted if the language has a CSS keyword in it (like CSS, for example ;)) $styles = "/$k/"; if ($this->language_data['CASE_SENSITIVE'][$k]) { $stuff_to_parse = preg_replace( "/([^a-zA-Z0-9\$_\|\#;>|^])($keyword)(?=[^a-zA-Z0-9_<\|%\-&])/e", "'\\1' . $func2('\\2', '$k', 'BEGIN') . '<|$styles>' . $func('\\2') . '|>' . $func2('\\2', '$k', 'END')", $stuff_to_parse ); } else { // Change the case of the word. // hackage again... must... release... 1.2... if ('smarty' == $this->language) { $hackage = '\/'; } else { $hackage = ''; } $stuff_to_parse = preg_replace( "/([^a-zA-Z0-9\$_\|\#;>$hackage|^])($keyword)(?=[^a-zA-Z0-9_<\|%\-&])/ie", "'\\1' . $func2('\\2', '$k', 'BEGIN') . '<|$styles>' . $func('\\2') . '|>' . $func2('\\2', '$k', 'END')", $stuff_to_parse ); } $stuff_to_parse = substr($stuff_to_parse, 0, strlen($stuff_to_parse) - 1); } } } } } // // Now that's all done, replace /[number]/ with the correct styles // foreach ($this->language_data['KEYWORDS'] as $k => $kws) { if (!$this->use_classes) { $attributes = ' style="' . $this->language_data['STYLES']['KEYWORDS'][$k] . '"'; } else { $attributes = ' class="kw' . $k . '"'; } $stuff_to_parse = str_replace("/$k/", $attributes, $stuff_to_parse); } // Put number styles in if (!$this->use_classes && $this->lexic_permissions['NUMBERS']) { $attributes = ' style="' . $this->language_data['STYLES']['NUMBERS'][0] . '"'; } else { $attributes = ' class="nu0"'; } $stuff_to_parse = str_replace('/NUM!/', $attributes, $stuff_to_parse); // // Highlight methods and fields in objects // if ($this->lexic_permissions['METHODS'] && $this->language_data['OOLANG']) { foreach ($this->language_data['OBJECT_SPLITTERS'] as $key => $splitter) { if (false !== stristr($stuff_to_parse, $splitter)) { if (!$this->use_classes) { $attributes = ' style="' . $this->language_data['STYLES']['METHODS'][$key] . '"'; } else { $attributes = ' class="me' . $key . '"'; } $stuff_to_parse = preg_replace("/(" . preg_quote($this->language_data['OBJECT_SPLITTERS'][$key], 1) . "[\s]*)([a-zA-Z\*\(][a-zA-Z0-9_\*]*)/", "\\1<|$attributes>\\2|>", $stuff_to_parse); } } } // // Highlight brackets. Yes, I've tried adding a semi-colon to this list. // You try it, and see what happens ;) // TODO: Fix lexic permissions not converting entities if shouldn't // be highlighting regardless // if ($this->lexic_permissions['BRACKETS']) { $code_entities_match = array('[', ']', '(', ')', '{', '}'); if (!$this->use_classes) { $code_entities_replace = array( '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">[|>', '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">]|>', '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">(|>', '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">)|>', '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">{|>', '<| style="' . $this->language_data['STYLES']['BRACKETS'][0] . '">}|>', ); } else { $code_entities_replace = array( '<| class="br0">[|>', '<| class="br0">]|>', '<| class="br0">(|>', '<| class="br0">)|>', '<| class="br0">{|>', '<| class="br0">}|>', ); } $stuff_to_parse = str_replace( $code_entities_match, $code_entities_replace, $stuff_to_parse ); } // // Add class/style for regexps // foreach ($this->language_data['REGEXPS'] as $key => $regexp) { if ($this->lexic_permissions['REGEXPS'][$key]) { if (!$this->use_classes) { $attributes = ' style="' . $this->language_data['STYLES']['REGEXPS'][$key] . '"'; } else { if(is_array($this->language_data['REGEXPS'][$key]) && array_key_exists(GESHI_CLASS, $this->language_data['REGEXPS'][$key])) { $attributes = ' class="' . $this->language_data['REGEXPS'][$key][GESHI_CLASS] . '"'; } else { $attributes = ' class="re' . $key . '"'; } } $stuff_to_parse = str_replace("!REG3XP$key!", "$attributes", $stuff_to_parse); } } // Replace with . for urls $stuff_to_parse = str_replace('', '.', $stuff_to_parse); // Replace <|UR1| with link_styles[GESHI_LINK])) { if ($this->use_classes) { $stuff_to_parse = str_replace('<|UR1|', 'link_target . ' href=', $stuff_to_parse); } else { $stuff_to_parse = str_replace('<|UR1|', 'link_target . ' style="' . $this->link_styles[GESHI_LINK] . '" href=', $stuff_to_parse); } } else { $stuff_to_parse = str_replace('<|UR1|', 'link_target . ' href=', $stuff_to_parse); } // // NOW we add the span thingy ;) // $stuff_to_parse = str_replace('<|', '', '', $stuff_to_parse ); return substr($stuff_to_parse, 1); } /** * Sets the time taken to parse the code * * @param microtime The time when parsing started * @param microtime The time when parsing ended * @since 1.0.2 * @access private */ function set_time ($start_time, $end_time) { $start = explode(' ', $start_time); $end = explode(' ', $end_time); $this->time = $end[0] + $end[1] - $start[0] - $start[1]; } /** * Gets the time taken to parse the code * * @return double The time taken to parse the code * @since 1.0.2 */ function get_time () { return $this->time; } /** * Gets language information and stores it for later use * * @access private * @todo Needs to load keys for lexic permissions for keywords, regexps etc */ function load_language ($file_name) { $this->enable_highlighting(); $language_data = array(); require $file_name; // Perhaps some checking might be added here later to check that // $language data is a valid thing but maybe not $this->language_data = $language_data; // Set strict mode if should be set if ($this->language_data['STRICT_MODE_APPLIES'] == GESHI_ALWAYS) { $this->strict_mode = true; } // Set permissions for all lexics to true // so they'll be highlighted by default foreach ($this->language_data['KEYWORDS'] as $key => $words) { $this->lexic_permissions['KEYWORDS'][$key] = true; } foreach ($this->language_data['COMMENT_SINGLE'] as $key => $comment) { $this->lexic_permissions['COMMENTS'][$key] = true; } foreach ($this->language_data['REGEXPS'] as $key => $regexp) { $this->lexic_permissions['REGEXPS'][$key] = true; } // Set default class for CSS $this->overall_class = $this->language; } /** * Takes the parsed code and various options, and creates the HTML * surrounding it to make it look nice. * * @param string The code already parsed * @return string The code nicely finalised * @since 1.0.0 * @access private */ function finalise ($parsed_code) { // Remove end parts of important declarations // This is BUGGY!! My fault for bad code: fix coming in 1.2 // @todo Remove this crap if ($this->enable_important_blocks && (strstr($parsed_code, @htmlspecialchars(GESHI_START_IMPORTANT, ENT_COMPAT, $this->encoding)) === false)) { $parsed_code = str_replace(@htmlspecialchars(GESHI_END_IMPORTANT, ENT_COMPAT, $this->encoding), '', $parsed_code); } // Add HTML whitespace stuff if we're using the
    header if ($this->header_type != GESHI_HEADER_PRE) { $parsed_code = $this->indent($parsed_code); } // purge some unnecessary stuff $parsed_code = preg_replace('#]+>(\s*)#', '\\1', $parsed_code); $parsed_code = preg_replace('#]+>(\s*)
    #', '\\1', $parsed_code); // If we are using IDs for line numbers, there needs to be an overall // ID set to prevent collisions. if ($this->add_ids && !$this->overall_id) { $this->overall_id = 'geshi-' . substr(md5(microtime()), 0, 4); } // If we're using line numbers, we insert
  • s and appropriate // markup to style them (otherwise we don't need to do anything) if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { // If we're using the
     header, we shouldn't add newlines because
                // the 
     will line-break them (and the 
  • s already do this for us) $ls = ($this->header_type != GESHI_HEADER_PRE) ? "\n" : ''; // Get code into lines $code = explode("\n", $parsed_code); // Set vars to defaults for following loop $parsed_code = ''; $i = 0; $attrs = array(); // Foreach line... foreach ($code as $line) {//echo "LINE:|".htmlspecialchars($line)."| ".strlen($line)."
    \n"; if ('' == $line || ' ' == $line) { $line = ' '; } // If this is a "special line"... if ($this->line_numbers == GESHI_FANCY_LINE_NUMBERS && $i % $this->line_nth_row == ($this->line_nth_row - 1)) { // Set the attributes to style the line if ($this->use_classes) { //$attr = ' class="li2"'; $attrs['class'][] = 'li2'; $def_attr = ' class="de2"'; } else { //$attr = ' style="' . $this->line_style2 . '"'; $attrs['style'][] = $this->line_style2; // This style "covers up" the special styles set for special lines // so that styles applied to special lines don't apply to the actual // code on that line $def_attr = ' style="' . $this->code_style . '"'; } // Span or div? $start = ""; $end = '
  • '; } else { if ($this->use_classes) { //$attr = ' class="li1"'; $attrs['class'][] = 'li1'; $def_attr = ' class="de1"'; } else { //$attr = ' style="' . $this->line_style1 . '"'; $attrs['style'][] = $this->line_style1; $def_attr = ' style="' . $this->code_style . '"'; } $start = ""; $end = ''; } ++$i; // Are we supposed to use ids? If so, add them if ($this->add_ids) { $attrs['id'][] = "$this->overall_id-$i"; } if ($this->use_classes && in_array($i, $this->highlight_extra_lines)) { $attrs['class'][] = 'ln-xtra'; } if (!$this->use_classes && in_array($i, $this->highlight_extra_lines)) { $attrs['style'][] = $this->highlight_extra_lines_style; } // Add in the line surrounded by appropriate list HTML $attr_string = ' '; foreach ($attrs as $key => $attr) { $attr_string .= $key . '="' . implode(' ', $attr) . '" '; } $attr_string = substr($attr_string, 0, -1); $parsed_code .= "$start$line$end$ls"; $attrs = array(); } } else { // No line numbers, but still need to handle highlighting lines extra. // Have to use divs so the full width of the code is highlighted $code = explode("\n", $parsed_code); $parsed_code = ''; $i = 0; foreach ($code as $line) { // Make lines have at least one space in them if they're empty if ('' == $line || ' ' == $line) { $line = ' '; } if (in_array(++$i, $this->highlight_extra_lines)) { if ($this->use_classes) { $parsed_code .= '
    '; } else { $parsed_code .= "
    highlight_extra_lines_style}\">"; } // Remove \n because it stuffs up
     header
                		$parsed_code .= $line . "
    "; } else { $parsed_code .= $line . "\n"; } } } if ($this->header_type == GESHI_HEADER_PRE) { // enforce line numbers when using pre $parsed_code = str_replace('
  • ', '
  •  
  • ', $parsed_code); } return $this->header() . chop($parsed_code) . $this->footer(); } /** * Creates the header for the code block (with correct attributes) * * @return string The header for the code block * @since 1.0.0 * @access private */ function header () { // Get attributes needed $attributes = $this->get_attributes(); $ol_attributes = ''; if ($this->line_numbers_start != 1) { $ol_attributes .= ' start="' . $this->line_numbers_start . '"'; } // Get the header HTML $header = $this->format_header_content(); if (GESHI_HEADER_NONE == $this->header_type) { if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { return "$header"; } return $header; } // Work out what to return and do it if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { if ($this->header_type == GESHI_HEADER_PRE) { return "$header"; } elseif ($this->header_type == GESHI_HEADER_DIV) { return "$header"; } } else { if ($this->header_type == GESHI_HEADER_PRE) { return "$header"; } elseif ($this->header_type == GESHI_HEADER_DIV) { return "$header"; } } } /** * Returns the header content, formatted for output * * @return string The header content, formatted for output * @since 1.0.2 * @access private */ function format_header_content () { $header = $this->header_content; if ($header) { if ($this->header_type == GESHI_HEADER_PRE) { $header = str_replace("\n", '', $header); } $header = $this->replace_keywords($header); if ($this->use_classes) { $attr = ' class="head"'; } else { $attr = " style=\"{$this->header_content_style}\""; } return "$header
    "; } } /** * Returns the footer for the code block. * * @return string The footer for the code block * @since 1.0.0 * @access private */ function footer () { $footer_content = $this->format_footer_content(); if (GESHI_HEADER_NONE == $this->header_type) { return ($this->line_numbers != GESHI_NO_LINE_NUMBERS) ? '' . $footer_content : $footer_content; } if ($this->header_type == GESHI_HEADER_DIV) { if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { return "$footer_content"; } return "$footer_content"; } else { if ($this->line_numbers != GESHI_NO_LINE_NUMBERS) { return "$footer_content"; } return "$footer_content"; } } /** * Returns the footer content, formatted for output * * @return string The footer content, formatted for output * @since 1.0.2 * @access private */ function format_footer_content () { $footer = $this->footer_content; if ($footer) { if ($this->header_type == GESHI_HEADER_PRE) { $footer = str_replace("\n", '', $footer);; } $footer = $this->replace_keywords($footer); if ($this->use_classes) { $attr = ' class="foot"'; } else { $attr = " style=\"{$this->footer_content_style}\""; } return "$footer"; } } /** * Replaces certain keywords in the header and footer with * certain configuration values * * @param string The header or footer content to do replacement on * @return string The header or footer with replaced keywords * @since 1.0.2 * @access private */ function replace_keywords ($instr) { $keywords = $replacements = array(); $keywords[] = '