Uses of Class
org.apache.bcel.generic.Instruction

Packages that use Instruction

org.apache.bcel.generic

This package contains the "generic" part of the Byte Code Engineering Library, i.e., classes to dynamically modify class objects and byte code instructions.

Uses of Instruction in org.apache.bcel.generic

Subclasses of Instruction in org.apache.bcel.generic

class	AALOAD AALOAD - Load reference from array
class	AASTORE AASTORE - Store into reference array
class	ACONST_NULL ACONST_NULL - Push null reference
class	ALOAD ALOAD - Load reference from local variable
class	ANEWARRAY ANEWARRAY - Create new array of references
class	ARETURN ARETURN - Return reference from method
class	ArithmeticInstruction Super class for the family of arithmetic instructions.
class	ArrayInstruction Super class for instructions dealing with array access such as IALOAD.
class	ARRAYLENGTH ARRAYLENGTH - Get length of array
class	ASTORE ASTORE - Store reference into local variable
class	ATHROW ATHROW - Throw exception
class	BALOAD BALOAD - Load byte or boolean from array
class	BASTORE BASTORE - Store into byte or boolean array
class	BIPUSH BIPUSH - Push byte on stack
class	BranchInstruction Abstract super class for branching instructions like GOTO, IFEQ, etc..
class	BREAKPOINT BREAKPOINT, JVM dependent, ignored by default
class	CALOAD CALOAD - Load char from array
class	CASTORE CASTORE - Store into char array
class	CHECKCAST CHECKCAST - Check whether object is of given type
class	ConversionInstruction Super class for the x2y family of instructions.
class	CPInstruction Abstract super class for instructions that use an index into the constant pool such as LDC, INVOKEVIRTUAL, etc.
class	D2F D2F - Convert double to float
class	D2I D2I - Convert double to int
class	D2L D2L - Convert double to long
class	DADD DADD - Add doubles
class	DALOAD DALOAD - Load double from array
class	DASTORE DASTORE - Store into double array
class	DCMPG DCMPG - Compare doubles: value1 > value2
class	DCMPL DCMPL - Compare doubles: value1 < value2
class	DCONST DCONST - Push 0.0 or 1.0, other values cause an exception
class	DDIV DDIV - Divide doubles
class	DLOAD DLOAD - Load double from local variable
class	DMUL DMUL - Multiply doubles
class	DNEG DNEG - Negate double
class	DREM DREM - Remainder of doubles
class	DRETURN DRETURN - Return double from method
class	DSTORE DSTORE - Store double into local variable
class	DSUB DSUB - Substract doubles
class	DUP DUP - Duplicate top operand stack word
class	DUP_X1 DUP_X1 - Duplicate top operand stack word and put two down
class	DUP_X2 DUP_X2 - Duplicate top operand stack word and put three down
class	DUP2 DUP2 - Duplicate two top operand stack words
class	DUP2_X1 DUP2_X1 - Duplicate two top operand stack words and put three down
class	DUP2_X2 DUP2_X2 - Duplicate two top operand stack words and put four down
class	F2D F2D - Convert float to double
class	F2I F2I - Convert float to int
class	F2L F2L - Convert float to long
class	FADD FADD - Add floats
class	FALOAD FALOAD - Load float from array
class	FASTORE FASTORE - Store into float array
class	FCMPG FCMPG - Compare floats: value1 > value2
class	FCMPL FCMPL - Compare floats: value1 < value2
class	FCONST FCONST - Push 0.0, 1.0 or 2.0, other values cause an exception
class	FDIV FDIV - Divide floats
class	FieldInstruction Super class for the GET/PUTxxx family of instructions.
class	FieldOrMethod Super class for InvokeInstruction and FieldInstruction, since they have some methods in common!
class	FLOAD FLOAD - Load float from local variable
class	FMUL FMUL - Multiply floats
class	FNEG FNEG - Negate float
class	FREM FREM - Remainder of floats
class	FRETURN FRETURN - Return float from method
class	FSTORE FSTORE - Store float into local variable
class	FSUB FSUB - Substract floats
class	GETFIELD GETFIELD - Fetch field from object
class	GETSTATIC GETSTATIC - Fetch static field from class
class	GOTO GOTO - Branch always (to relative offset, not absolute address)
class	GOTO_W GOTO_W - Branch always (to relative offset, not absolute address)
class	GotoInstruction Super class for GOTO
class	I2B I2B - Convert int to byte
class	I2C I2C - Convert int to char
class	I2D I2D - Convert int to double
class	I2F I2F - Convert int to float
class	I2L I2L - Convert int to long
class	I2S I2S - Convert int to short
class	IADD IADD - Add ints
class	IALOAD IALOAD - Load int from array
class	IAND IAND - Bitwise AND int
class	IASTORE IASTORE - Store into int array
class	ICONST ICONST - Push value between -1, ..., 5, other values cause an exception
class	IDIV IDIV - Divide ints
class	IF_ACMPEQ IF_ACMPEQ - Branch if reference comparison succeeds
class	IF_ACMPNE IF_ACMPNE - Branch if reference comparison doesn't succeed
class	IF_ICMPEQ IF_ICMPEQ - Branch if int comparison succeeds
class	IF_ICMPGE IF_ICMPGE - Branch if int comparison succeeds
class	IF_ICMPGT IF_ICMPGT - Branch if int comparison succeeds
class	IF_ICMPLE IF_ICMPLE - Branch if int comparison succeeds
class	IF_ICMPLT IF_ICMPLT - Branch if int comparison succeeds
class	IF_ICMPNE IF_ICMPNE - Branch if int comparison doesn't succeed
class	IFEQ IFEQ - Branch if int comparison with zero succeeds
class	IFGE IFGE - Branch if int comparison with zero succeeds
class	IFGT IFGT - Branch if int comparison with zero succeeds
class	IfInstruction Super class for the IFxxx family of instructions.
class	IFLE IFLE - Branch if int comparison with zero succeeds
class	IFLT IFLT - Branch if int comparison with zero succeeds
class	IFNE IFNE - Branch if int comparison with zero succeeds
class	IFNONNULL IFNONNULL - Branch if reference is not null
class	IFNULL IFNULL - Branch if reference is not null
class	IINC IINC - Increment local variable by constant
class	ILOAD ILOAD - Load int from local variable onto stack
class	IMPDEP1 IMPDEP1 - Implementation dependent
class	IMPDEP2 IMPDEP2 - Implementation dependent
class	IMUL IMUL - Multiply ints
class	INEG INEG - Negate int
class	INSTANCEOF INSTANCEOF - Determine if object is of given type
class	InvokeInstruction Super class for the INVOKExxx family of instructions.
class	INVOKEINTERFACE INVOKEINTERFACE - Invoke interface method
class	INVOKESPECIAL INVOKESPECIAL - Invoke instance method; special handling for superclass, private and instance initialization method invocations
class	INVOKESTATIC INVOKESTATIC - Invoke a class (static) method
class	INVOKEVIRTUAL INVOKEVIRTUAL - Invoke instance method; dispatch based on class
class	IOR IOR - Bitwise OR int
class	IREM IREM - Remainder of int
class	IRETURN IRETURN - Return int from method
class	ISHL ISHL - Arithmetic shift left int
class	ISHR ISHR - Arithmetic shift right int
class	ISTORE ISTORE - Store int from stack into local variable
class	ISUB ISUB - Substract ints
class	IUSHR IUSHR - Logical shift right int
class	IXOR IXOR - Bitwise XOR int
class	JSR JSR - Jump to subroutine
class	JSR_W JSR_W - Jump to subroutine
class	JsrInstruction Super class for JSR - Jump to subroutine
class	L2D L2D - Convert long to double
class	L2F L2F - Convert long to float
class	L2I L2I - Convert long to int
class	LADD LADD - Add longs
class	LALOAD LALOAD - Load long from array
class	LAND LAND - Bitwise AND longs
class	LASTORE LASTORE - Store into long array
class	LCMP LCMP - Compare longs:
class	LCONST LCONST - Push 0 or 1, other values cause an exception
class	LDC LDC - Push item from constant pool.
class	LDC_W LDC_W - Push item from constant pool (wide index)
class	LDC2_W LDC2_W - Push long or double from constant pool
class	LDIV LDIV - Divide longs
class	LLOAD LLOAD - Load long from local variable
class	LMUL LMUL - Multiply longs
class	LNEG LNEG - Negate long
class	LoadInstruction Denotes an unparameterized instruction to load a value from a local variable, e.g.
class	LocalVariableInstruction Abstract super class for instructions dealing with local variables.
class	LOOKUPSWITCH LOOKUPSWITCH - Switch with unordered set of values
class	LOR LOR - Bitwise OR long
class	LREM LREM - Remainder of long
class	LRETURN LRETURN - Return long from method
class	LSHL LSHL - Arithmetic shift left long
class	LSHR LSHR - Arithmetic shift right long
class	LSTORE LSTORE - Store long into local variable
class	LSUB LSUB - Substract longs
class	LUSHR LUSHR - Logical shift right long
class	LXOR LXOR - Bitwise XOR long
class	MONITORENTER MONITORENTER - Enter monitor for object
class	MONITOREXIT MONITOREXIT - Exit monitor for object
class	MULTIANEWARRAY MULTIANEWARRAY - Create new mutidimensional array of references
class	NEW NEW - Create new object
class	NEWARRAY NEWARRAY - Create new array of basic type (int, short, ...)
class	NOP NOP - Do nothing
class	POP POP - Pop top operand stack word
class	POP2 POP2 - Pop two top operand stack words
class	PUTFIELD PUTFIELD - Put field in object
class	PUTSTATIC PUTSTATIC - Put static field in class
class	RET RET - Return from subroutine
class	RETURN RETURN - Return from void method
class	ReturnInstruction Super class for the xRETURN family of instructions.
class	SALOAD SALOAD - Load short from array
class	SASTORE SASTORE - Store into short array
class	Select Select - Abstract super class for LOOKUPSWITCH and TABLESWITCH instructions.
class	SIPUSH SIPUSH - Push short
class	StackInstruction Super class for stack operations like DUP and POP.
class	StoreInstruction Denotes an unparameterized instruction to store a value into a local variable, e.g.
class	SWAP SWAP - Swa top operand stack word
class	TABLESWITCH TABLESWITCH - Switch within given range of values, i.e., low..high

Fields in org.apache.bcel.generic declared as Instruction

static Instruction	InstructionConstants.ACONST_NULL
static Instruction	InstructionConstants.ARRAYLENGTH
static Instruction	InstructionConstants.ATHROW
static Instruction	InstructionConstants.DCMPG
static Instruction	InstructionConstants.DCMPL
static Instruction	InstructionConstants.DCONST_0
static Instruction	InstructionConstants.DCONST_1
static Instruction	InstructionConstants.FCMPG
static Instruction	InstructionConstants.FCMPL
static Instruction	InstructionConstants.FCONST_0
static Instruction	InstructionConstants.FCONST_1
static Instruction	InstructionConstants.FCONST_2
static Instruction	InstructionConstants.ICONST_0
static Instruction	InstructionConstants.ICONST_1
static Instruction	InstructionConstants.ICONST_2
static Instruction	InstructionConstants.ICONST_3
static Instruction	InstructionConstants.ICONST_4
static Instruction	InstructionConstants.ICONST_5
static Instruction	InstructionConstants.ICONST_M1
static Instruction[]	InstructionConstants.INSTRUCTIONS Get object via its opcode, for immutable instructions like branch instructions entries are set to null.
static Instruction	InstructionConstants.LCMP
static Instruction	InstructionConstants.LCONST_0
static Instruction	InstructionConstants.LCONST_1
static Instruction	InstructionConstants.MONITORENTER
static Instruction	InstructionConstants.MONITOREXIT
static Instruction	InstructionConstants.NOP Predefined instruction objects

Methods in org.apache.bcel.generic that return Instruction

Instruction	Instruction.copy() Use with caution, since `BranchInstruction's have a `target' reference which is not copied correctly (only basic types are).
Instruction	InstructionFactory.createAppend(Type type)
Instruction	InstructionFactory.createCast(Type src_type, Type dest_type) Create conversion operation for two stack operands, this may be an I2C, instruction, e.g., if the operands are basic types and CHECKCAST if they are reference types.
Instruction	InstructionFactory.createConstant(Object value) Uses PUSH to push a constant value onto the stack.
Instruction	InstructionFactory.createNewArray(Type t, short dim) Create new array of given size and type.
static Instruction	InstructionFactory.createNull(Type type) Create "null" value for reference types, 0 for basic types like int
static Instruction	InstructionFactory.createThis() Create reference to `this'
Instruction	SWITCH.getInstruction()
Instruction	PUSH.getInstruction()
Instruction	InstructionHandle.getInstruction()
Instruction[]	InstructionList.getInstructions()
static Instruction	Instruction.readInstruction(ByteSequence bytes) Read an instruction from (byte code) input stream and return the appropiate object.
Instruction	InstructionHandle.swapInstruction(Instruction i) Temporarily swap the current instruction, without disturbing anything.

Methods in org.apache.bcel.generic with parameters of type Instruction

InstructionHandle	InstructionList.append(Instruction i) Append an instruction to the end of this list.
InstructionHandle	InstructionList.append(Instruction i, CompoundInstruction c) Append a compound instruction, after instruction i.
InstructionHandle	InstructionList.append(InstructionHandle ih, Instruction i) Append an instruction after instruction (handle) ih contained in this list.
InstructionHandle	InstructionList.append(Instruction i, Instruction j) Append a single instruction j after another instruction i, which must be in this list of course!
InstructionHandle	InstructionList.append(Instruction i, InstructionList il) Append another list after instruction i contained in this list.
boolean	InstructionList.contains(Instruction i)
void	InstructionList.delete(Instruction i) Remove instruction from this list.
void	InstructionList.delete(Instruction from, Instruction to) Remove instructions from instruction `from' to instruction `to' contained in this list.
boolean	InstructionComparator.equals(Instruction i1, Instruction i2)
InstructionHandle	InstructionList.insert(Instruction i) Insert an instruction at start of this list.
InstructionHandle	InstructionList.insert(Instruction i, CompoundInstruction c) Insert a compound instruction before instruction i.
InstructionHandle	InstructionList.insert(InstructionHandle ih, Instruction i) Insert an instruction before instruction (handle) ih contained in this list.
InstructionHandle	InstructionList.insert(Instruction i, Instruction j) Insert a single instruction j before another instruction i, which must be in this list of course!
InstructionHandle	InstructionList.insert(Instruction i, InstructionList il) Insert another list before Instruction i contained in this list.
void	InstructionHandle.setInstruction(Instruction i) Replace current instruction contained in this handle.
void	BranchHandle.setInstruction(Instruction i) Set new contents.
Instruction	InstructionHandle.swapInstruction(Instruction i) Temporarily swap the current instruction, without disturbing anything.

Constructors in org.apache.bcel.generic with parameters of type Instruction

InstructionHandle(Instruction i)

InstructionList(Instruction i)
Create instruction list containing one instruction.